| Business Type | Manufacturer, Supplier, Retailer, Trader |
| Rockstar_400 Data Sheet |  View |
Rockstar 400 is a wear resistant quenched and tempered steel plate grade having an excellent combination of hardness, formability, weldability and toughness to meet requirement. It has designed with relatively low carbon equivalent for better weldability.
Product Application
Rockstar 400 is a cost effective abrasion resistant material used for fabrication of crushers, liners for truck beds, buckets, hoppers, chutes, excavators, and conveyor throughs, conrete mixer drums, trash truck bottoms, bucket lips, street sweepers and dump trailers and many more.
Dimensions
| Thickness | Width |
| 6 – 75 mm | Up to 3500mm;higher width can be provided on a case to case basis, depending on thickness |
| Delivery Condition | Quenched/Quenched and tempered. The plates are delivered with sheared or thermally cut edges. Untrimmed edges can also be delivered after agreement. Plates can be delivered in Shot blasted and primer coated surface condition. |
Chemical Composition (Ladle Analysis)
| Plate Thickness mm |
C Max % |
Mn Max % |
P Max % |
S Max % |
Si Max % |
Cr Max % |
Ni Max % |
Mo Max % |
B Max % |
CE Max |
PCM Max |
| 6.0 – 20.0 | 0.16 | 1.6 | 0.025 | 0.010 | 0.70 | 0.50 | 0.25 | 0.25 | 0.0040 | 0.45 | 0.28 |
| 21.0 – 32.0 | 0.18 | 1.60 | 0.025 | 0.010 | 0.70 | 1.00 | 0.25 | 0.25 | 0.0040 | 0.48 | 0.29 |
| 32.1 – 50.0 | 0.22 | 1.60 | 0.025 | 0.010 | 0.70 | 1.40 | 0.50 | 0.60 | 0.0040 | 0.57 | 0.33 |
| 50.1 – 75.0 | 0.22 | 1.60 | 0.025 | 0.010 | 0.70 | 1.40 | 0.50 | 0.60 | 0.0040 | 0.65 | 0.40 |
Looking for "Rockstar 400 Plates" ?
Kilogram
