| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Width | Up to 3000 mm |
| Feature | Corrosion Resistant |
| Thickness | 5-12mm |
| Click to view more | |
Preferred Buyer From
| Location | Worldwide |
Product Details
We are involved in offering durable Abrex 400 Plates at the most competitive prices. We are the noted Abrex 400 Plate Supplier. These plates are manufactured using quality materials at vendor’s end. In addition, our procuring agents and quality auditors stringently check each and every product against varied quality parameters. The company is located in Mumbai (India) and caters to the diverse requirements of the buyers. We ensure on time distribution of wholesale as well as retail consignments owing to an extensive vendor, distributor and logistic facility base. We are capable of undertaking bulk as well as urgent orders of the clients.
Specification by Type and Designation
| Type | Designation | Plate Thickness t (mm) | Brineel Hardness (HBW)*1 | Charpy Impact Test (L Direction)*2 | ||
| Aiming | Range | Test Temperature (oC) | Absorbed Energy (J) | |||
| Standard Type | ABREX 400 | 6 (4.0) ~100 | 400 | 360~440 | -- | -- |
| Extra Tough Type | ABREX 400LT | 6 (4.0) ~ 60 | 400 | 360~440 | -40 | >27 |
.
| Type | Designation | Thickness (mm) |
Chemical Composition*1 (%) |
|||||||||||
| C | SI | Mn | P | S | Ni | Cr | Mo | B | PCM (t:thickness)*2 | |||||
| T<25 | T<50 | t>50 | ||||||||||||
| Standard Type | ABREX 400 | ~100 | <0.21 | <0.70 | <2.00 | <0.025 | <0.010 | <1.00 | <1.20 | <0.060 | <0.005 | <0.30 | <0.35 | <0.35 |
| Extra Tough Type | ABREX 400LT | ~60 | <0.21 | <1.20 | <2.00 | <0.020 | <0.010 | <1.00 | <1.20 | <0.60 | <0.005 | <0.30 | <0.35 | <0.35 |
Typical Properties and Characteristics
| Type | Designation | Thickness | Chemical Composition |
Brinell Hardness (HBW) |
Mechanical Properties (Reference Values) | |||||||
| Tensile Tests | Bending Tests*2 | Charpy Impact Test | ||||||||||
| PCM (%) | Ceq*1 (%) | Yield Strength (N/mm2) | Tensile Strength (N/mm2) |
Bend Radius (t :thickness) (t: espesor) |
Angle | Result | Temperature (oC) | Absorbed Energy (J) | ||||
| Standard Type | ABREX 400 | 25 | 0.27 | 0.49 | 407, 405, 406 | 1025 | 1259 | 3t | 180o | No Cracking | 0 | 38 |
| Extra Tough Type | ABREX 400LT | 60 | 0.30 | 0.60 | 390, 393, 393 | 1162 | 1207 | 3t | 180o | No Cracking | -40 | 63 |
| Test Condition | JIS Z2243 Surface | JIS No. 5 or No. 4 T-Direction | JIS No.1 T-Direction | 2mm V Notch, L-Direction | ||||||||
